Quick view Details CryoVation | sku: 0919-1301 Sump Seal, WCP MSRP: Now: $22.75 Add to Cart Compare Quick view Details CryoVation | sku: 0914-9920 O-Ring, WCP MSRP: Now: $9.47 Add to Cart Compare Quick view Details CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem MSRP: Now: $1,234.69 Choose Options Compare Quick view Details Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view Details CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" MSRP: Now: $23.84 Add to Cart Compare Quick view Details CryoVation | sku: 0919-1343 Valve Body WCP 45 MSRP: Now: $365.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" MSRP: Now: $24.55 Add to Cart Compare Quick view Details sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 MSRP: Now: $25.00 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0270 Inlet Valve Plate MSRP: Now: $73.39 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0285 Piston - 1-3/4" MSRP: Now: $242.85 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod MSRP: Now: $231.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded MSRP: Now: $520.00 Add to Cart Compare Quick view CryoVation | sku: 0919-1301 Sump Seal, WCP Viton Sump Seal for all WCP Sumps MSRP: Now: $22.75 Add to Cart Compare Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view Details CryoVation | sku: 0914-9920 O-Ring, WCP MSRP: Now: $9.47 Add to Cart Compare Quick view Details CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem MSRP: Now: $1,234.69 Choose Options Compare Quick view Details Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view Details CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" MSRP: Now: $23.84 Add to Cart Compare Quick view Details CryoVation | sku: 0919-1343 Valve Body WCP 45 MSRP: Now: $365.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" MSRP: Now: $24.55 Add to Cart Compare Quick view Details sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 MSRP: Now: $25.00 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0270 Inlet Valve Plate MSRP: Now: $73.39 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0285 Piston - 1-3/4" MSRP: Now: $242.85 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod MSRP: Now: $231.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded MSRP: Now: $520.00 Add to Cart Compare Quick view CryoVation | sku: 0919-1301 Sump Seal, WCP Viton Sump Seal for all WCP Sumps MSRP: Now: $22.75 Add to Cart Compare Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view Details CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem MSRP: Now: $1,234.69 Choose Options Compare Quick view Details Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view Details CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" MSRP: Now: $23.84 Add to Cart Compare Quick view Details CryoVation | sku: 0919-1343 Valve Body WCP 45 MSRP: Now: $365.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" MSRP: Now: $24.55 Add to Cart Compare Quick view Details sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 MSRP: Now: $25.00 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0270 Inlet Valve Plate MSRP: Now: $73.39 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0285 Piston - 1-3/4" MSRP: Now: $242.85 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod MSRP: Now: $231.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded MSRP: Now: $520.00 Add to Cart Compare Quick view CryoVation | sku: 0919-1301 Sump Seal, WCP Viton Sump Seal for all WCP Sumps MSRP: Now: $22.75 Add to Cart Compare Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view Details Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view Details CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" MSRP: Now: $23.84 Add to Cart Compare Quick view Details CryoVation | sku: 0919-1343 Valve Body WCP 45 MSRP: Now: $365.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" MSRP: Now: $24.55 Add to Cart Compare Quick view Details sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 MSRP: Now: $25.00 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0270 Inlet Valve Plate MSRP: Now: $73.39 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0285 Piston - 1-3/4" MSRP: Now: $242.85 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod MSRP: Now: $231.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded MSRP: Now: $520.00 Add to Cart Compare Quick view CryoVation | sku: 0919-1301 Sump Seal, WCP Viton Sump Seal for all WCP Sumps MSRP: Now: $22.75 Add to Cart Compare Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view Details CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" MSRP: Now: $23.84 Add to Cart Compare Quick view Details CryoVation | sku: 0919-1343 Valve Body WCP 45 MSRP: Now: $365.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" MSRP: Now: $24.55 Add to Cart Compare Quick view Details sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 MSRP: Now: $25.00 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0270 Inlet Valve Plate MSRP: Now: $73.39 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0285 Piston - 1-3/4" MSRP: Now: $242.85 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod MSRP: Now: $231.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded MSRP: Now: $520.00 Add to Cart Compare Quick view CryoVation | sku: 0919-1301 Sump Seal, WCP Viton Sump Seal for all WCP Sumps MSRP: Now: $22.75 Add to Cart Compare Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view Details CryoVation | sku: 0919-1343 Valve Body WCP 45 MSRP: Now: $365.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" MSRP: Now: $24.55 Add to Cart Compare Quick view Details sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 MSRP: Now: $25.00 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0270 Inlet Valve Plate MSRP: Now: $73.39 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0285 Piston - 1-3/4" MSRP: Now: $242.85 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod MSRP: Now: $231.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded MSRP: Now: $520.00 Add to Cart Compare Quick view CryoVation | sku: 0919-1301 Sump Seal, WCP Viton Sump Seal for all WCP Sumps MSRP: Now: $22.75 Add to Cart Compare Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view Details CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" MSRP: Now: $24.55 Add to Cart Compare Quick view Details sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 MSRP: Now: $25.00 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0270 Inlet Valve Plate MSRP: Now: $73.39 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0285 Piston - 1-3/4" MSRP: Now: $242.85 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod MSRP: Now: $231.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded MSRP: Now: $520.00 Add to Cart Compare Quick view CryoVation | sku: 0919-1301 Sump Seal, WCP Viton Sump Seal for all WCP Sumps MSRP: Now: $22.75 Add to Cart Compare Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view Details sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 MSRP: Now: $25.00 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0270 Inlet Valve Plate MSRP: Now: $73.39 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0285 Piston - 1-3/4" MSRP: Now: $242.85 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod MSRP: Now: $231.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded MSRP: Now: $520.00 Add to Cart Compare Quick view CryoVation | sku: 0919-1301 Sump Seal, WCP Viton Sump Seal for all WCP Sumps MSRP: Now: $22.75 Add to Cart Compare Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view Details CryoVation | sku: 0915-0270 Inlet Valve Plate MSRP: Now: $73.39 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0285 Piston - 1-3/4" MSRP: Now: $242.85 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod MSRP: Now: $231.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded MSRP: Now: $520.00 Add to Cart Compare Quick view CryoVation | sku: 0919-1301 Sump Seal, WCP Viton Sump Seal for all WCP Sumps MSRP: Now: $22.75 Add to Cart Compare Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view Details CryoVation | sku: 0915-0285 Piston - 1-3/4" MSRP: Now: $242.85 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod MSRP: Now: $231.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded MSRP: Now: $520.00 Add to Cart Compare Quick view CryoVation | sku: 0919-1301 Sump Seal, WCP Viton Sump Seal for all WCP Sumps MSRP: Now: $22.75 Add to Cart Compare Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view Details CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod MSRP: Now: $231.75 Add to Cart Compare Quick view Details CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded MSRP: Now: $520.00 Add to Cart Compare Quick view CryoVation | sku: 0919-1301 Sump Seal, WCP Viton Sump Seal for all WCP Sumps MSRP: Now: $22.75 Add to Cart Compare Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view Details CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded MSRP: Now: $520.00 Add to Cart Compare Quick view CryoVation | sku: 0919-1301 Sump Seal, WCP Viton Sump Seal for all WCP Sumps MSRP: Now: $22.75 Add to Cart Compare Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view CryoVation | sku: 0919-1301 Sump Seal, WCP Viton Sump Seal for all WCP Sumps MSRP: Now: $22.75 Add to Cart Compare Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view CryoVation | sku: 0914-9920 O-Ring, WCP The o-ring seals the cold end body to the intermediate MSRP: Now: $9.47 Add to Cart Compare Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view CryoVation | sku: 0919-1367 Vertical Cold End Exchange, WCP or Cryochem Includes Cold End Assembly, Coupler with set screw, (2) O-Rings and a Sump seal. Every cold end comes with all new soft goods and inspected or replaced major components. IMPORTANT NOTICE If the returned cold end assembly is not received... MSRP: Now: $1,234.69 Choose Options Compare Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view Parker | sku: 5383-7791 Discharge Elbow, WCP MSRP: Now: $27.50 Add to Cart Compare Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view CryoVation | sku: 0914-8710 Graphoil Split Ring, 11/16" In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service. Reference # P1660-1610 MSRP: Now: $23.84 Add to Cart Compare Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view CryoVation | sku: 0919-1343 Valve Body WCP 45 This valve body takes a 5/8" ball, Solid SS, clean for O2 service MSRP: Now: $365.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view CryoVation | sku: 0915-0240 Locknut, Pushrod 11/16" Brass, Oxygen Clean MSRP: Now: $24.55 Add to Cart Compare Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view sku: 0919-1387 Stud, Sump Spacer, WCP - set of 8 STUD,SUMP SPACER,1/2"-13 X 2-1/2", S.S., SET OF (8), cleaned for oxygen service (intermediates from 2010+ will require (1) 2" stud and (7) 2.5" studs.) MSRP: Now: $25.00 Add to Cart Compare Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view CryoVation | sku: 0915-0270 Inlet Valve Plate The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides MSRP: Now: $73.39 Add to Cart Compare Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view CryoVation | sku: 0915-0285 Piston - 1-3/4" Piston, Brass - 1-3/4" Diameter, clean for oxygen service, commonly used on Cryochem P1800 and WCP 45 models - requires 3 Piston Rings and 1 Rider Ring (sold separately) MSRP: Now: $242.85 Add to Cart Compare Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected × OK
Quick view CryoVation | sku: 0915-0230 Coupler - 11/16" Pushrod Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45 MSRP: Now: $231.75 Add to Cart Compare Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected
Quick view CryoVation | sku: 0915-0180 Pushrod - 11/16" Threaded 11/16" Diameter SS Pushrod with threaded ends, clean for oxygen service, commonly used on Cryochem P1700 and P1800 cold ends and Woodland / CryoVation WCP 27, 36 and 45 MSRP: Now: $520.00 Add to Cart Compare Previous 1 2 3 Next Previous 1 2 3 Next Compare Selected