This pump has a 11/16" Threaded Pushrod and a 1.5" diameter piston
Bolt, 3/8" x 1-1/2", SS. Reference # S10055
As shown in photo. Cold End Assembly for a Woodland / CryoVation WCP 36 pump. 1.5" piston X 11/16" pushrod comes with coupler
Coupler, SS, for 11/16" Pushrod to connet to the Crosshead, comes with nylok set screw, oxygen clean, commonly used on Cryochem P1700 and P1800, Woodland / CryoVation models WCP 27, 36 and 45
This sump assembly is vacuum jacketed with 3/4" FPT liquid supply and vent return ports, 0919-1310 sump seal included
If the sump assembly is not received back within 14 days of receipt your credit card will be...
Filter Spacer, Upper, WCP Cold End, P1600 Cold End, P1660 Cold End
Reference # P1600-1116
In the event that you are getting a packing leak or you have bottomed out your packing gland, use this split ring to compress further. Clean for oxygen service.
Reference # P1660-1610
The Inlet Valve plate is used on the suction/discharge assemblies for the WCP 36, 45 and P1740, and comes clean for oxygen service, lapped on both sides
The internal discharge tube assembly comes with 0914-9960 o-ring and a set of teflon ferrules and SS ferrules, clean for oxygen service
Laminated Shims, Set, WCP Cold End, P1740 Cold End, P1600 Cold End, P1660 Cold End
Reference #: P2000-025
Load Ring, 0.687", WCP Cold End, P1740 Cold End, P1660 Cold End
Reference # P1660-2104