Comes in a set of 6, oxygen clean
Tighten to 10 ft/lbs*
* never when pump is cold
Complete new Cold End Assembly for most horizontal cryogenic pumps (piston 1.2"), cleaned for oxygen service. Comes with suction plate gasket and installation instructions.
Includes the following parts:
Expander Ring, CV, Set of 3. Reference # 24961-1
Copper Gasket for the discharge port of most horizontal pumps: CV, NDPD, DPD, SDPD, LXR
Gasket, Suction Valve, clean for oxygen service
This teflon hat seal is made to fit 1.2" diameter piston cryogenic pumps including: CV, LXR, DPD, NDPD, SDPD, WDPD
Includes Cold End Assembly, set screw and suction plate gasket. Every cold end comes with all new soft goods, inspected or replaced major components and a fresh vacuum insulation.
If the returned cold end assembly is not...
NDPD 1.2" COLD END SEAL KIT
NDPD 1.2" COLD END SEAL KIT 53586-1
Includes a NDPD style 1.2" bore cold end and a NDPD 1.26" stroke drive end assembly, New, clean for Oxygen service and bearings packed with Krytox oxygen compatible grease
45158-1 Drive Assy 1.26”
35779-1 Cold End 1...
O-Ring, Silicone, Clean for Oxygen Service, used on 1.2" Piston for CV, WCPH, LXR, WDPD, NDPD, SDPD pumps