Complete New Cold End Assembly for most horizontal cryogenic pumps (1.0" Piston). Clean for oxygen service. Comes with plate gasket and installation instructions.
Includes the following parts:
Copper Gasket for the discharge port of most horizontal pumps: CV, NDPD, DPD, SDPD, LXR
This teflon hat seal is made to fit 1.0" diameter piston cryogenic pumps including: CV, LXR, DPD, NDPD, SDPD, WDPD
Includes Cold End Assembly, set screw and suction plate gasket. Every cold end comes with all new soft goods, inspected or replaced major components and a fresh vacuum insulation.
If the returned cold end assembly is not...
CRYOSTAR SDPD, 1.2" MINOR KIT
Set of 3 Piston Rings for a 1.0" Piston horizontal cryogenic reciprocating pump, common to LXR, CV, DPD, NDPD, WDPD, SDPD, etc. Clean for Oxygen Service
For Cold end piston, nylok tip
Cryostar Suction plate gasket
reference number 730010738
Glass filled teflon gasket that goes on the end of the cold end and seals the suction adapter plate.
SS Plate that goes on the end of most Horizontal cold end assemblies, 6 holes, 2 threaded ports for liquid supply and vapor return lines.